ScaleAwayQuickKill-20 concentrate is a quick-kill biocide that easily hydrolyzes under both acidic and alkaline conditions. It is preferred
for its instability in water as it quickly kills bacteria, fungi and algae and then quickly degrades. ScaleAwayQuickKill-20 concentrate is a highly effective, environmentally friendly biocide. It provides a quick kill while also quickly
degrading in water.
ScaleAwayQuickKill-20 concentrate is used in a wide variety of applications:
In water treatment of cooling towers, in industrial pipe reticulations, in pulp and paper as a preservative in paper
coating and slurries, in reverse osmosis applications, also as a biocide in hydraulic fracturing wells and
metalworking fluid applications.
ScaleAwayQuickKill-20 concentrate degrades quickly in aqueous environments. At neutral pH, it's half-life is about nine hours.
Biocide release with ScaleAwayQuickKill-20 concentrate provides effective control in cooling towers and pipe reticulations, and the biocide in
the blowdown discharge degrades quickly. So it’s easy to meet strict environmental regulations on cooling tower water
discharge.
Reverse Osmosis Membrane Biocide & Disinfectant
ScaleAwayQuickKill-20 concentrate is an excelent Reverse Osmosis Biocide - Non-oxidizing, non-ionic biocide that can be used either on line
or as part of a cleaning program to control biofouling in reverse osmosis (RO) membranes. When used as an on-line treatment,
the biocide should be dosed prior to the RO system to control bio-growth in the membranes.
ScaleAwayQuickKill-20 concentrate is fast acting and readily decomposes to harmless by-products on discharge. On-line, it is dosed just
prior to the RO system to control biofouling in the membranes.
Dose rate is typically 100 ppm for 1 hour. Frequency of application depends on degree of biological contamination in the
feed water and rate of biofilm growth in the membranes. Typically frequency of application can vary from every other day
to once a month. The half-life of ScaleAwayQuickKill-20 concentrate is reduced with the increase of pH. In high pH feed waters (> 8.5) the
dose rate and contact time should be doubled.
Contact us TODAY to purchase industrial grade descaling chemicals or to discuss a water management solution for your specific application!
|
|